Gynaecology chair electric
With black integral foam leg restsItem No: 016-2031
The gynaecology chair is very compact and practical. Due to its design it fits also smaller rooms. Focus while developing the chair has been patient comfort, user-friendliness and ergonomic design.
CE certification
CE certified according to MDR.
How to adjust it
All Tarsus gynaecology chairs have at least two motors, one adjusting height and one for the seat tilt / Trendelenburg. The backrest is adjusted by hep of a gas spring as standard, with an electric motor as option.
Chassis and castors
The all-welded steel chassis is available as powder-coated or chromium-plated. The design with four lifting points makes the chair very stable. The quality 100 mm castors is locked and resleased by one press, so called central locking. This helps when moving the chair for cleaning or for emergency patient transports.
A low minimum height (53 cm) helps getting the patient on and off the chair, while its high maximum height (110 cm) gives the professionals the possibility for a correct and ergonomic work posture.
A paper-roll holder is included.
Leg holders
The leg holders are fully adjustable in height, angle, around its axis and along the accessory rails. They are available in two different designs, model Standard with its removable pad in the same colour as the chair and model Integral in an integral foam. Both the leg holders and the optional patient handles is easily and fully removable from the accessory rails, which is a great help when moving a patient onto the chair from a bed or a wheel chair.
Pads and colour
The pads are filled with a 4 cm foam plastic, covered in artificial leather available in many different colours to match the room decor. The pads are protected against bumps by a chromium-plated steel frame.
CE certified according to MDR.
How to adjust it
All Tarsus gynaecology chairs have at least two motors, one adjusting height and one for the seat tilt / Trendelenburg. The backrest is adjusted by hep of a gas spring as standard, with an electric motor as option.
Chassis and castors
The all-welded steel chassis is available as powder-coated or chromium-plated. The design with four lifting points makes the chair very stable. The quality 100 mm castors is locked and resleased by one press, so called central locking. This helps when moving the chair for cleaning or for emergency patient transports.
A low minimum height (53 cm) helps getting the patient on and off the chair, while its high maximum height (110 cm) gives the professionals the possibility for a correct and ergonomic work posture.
A paper-roll holder is included.
Leg holders
The leg holders are fully adjustable in height, angle, around its axis and along the accessory rails. They are available in two different designs, model Standard with its removable pad in the same colour as the chair and model Integral in an integral foam. Both the leg holders and the optional patient handles is easily and fully removable from the accessory rails, which is a great help when moving a patient onto the chair from a bed or a wheel chair.
Pads and colour
The pads are filled with a 4 cm foam plastic, covered in artificial leather available in many different colours to match the room decor. The pads are protected against bumps by a chromium-plated steel frame.
Popular accessories
There are several popular accessories available for the gynaecology chairs, see the full list of accessories here. Let us highlight some of the most common and popular:
* The chromium-plated patient handles is an excellent support for a patient while standing up or be seated. They are very easily movable along the accessory rails and may also be removed fully.
* The Pull-out leg sections is a good tool for leg rest for a patient. After sitting in the leg holders for a long while, resting on the pull-out leg section is a great release.
* The Neck cushion provides for comfort and rest for the patient.
Motors and controls
220-240 V/24 V. Foot control (24 V) is standard, hand control (24 V) is optional. The chair is available with battery backup as option.
There are several popular accessories available for the gynaecology chairs, see the full list of accessories here. Let us highlight some of the most common and popular:
* The chromium-plated patient handles is an excellent support for a patient while standing up or be seated. They are very easily movable along the accessory rails and may also be removed fully.
* The Pull-out leg sections is a good tool for leg rest for a patient. After sitting in the leg holders for a long while, resting on the pull-out leg section is a great release.
* The Neck cushion provides for comfort and rest for the patient.
Motors and controls
220-240 V/24 V. Foot control (24 V) is standard, hand control (24 V) is optional. The chair is available with battery backup as option.
May we send you an offer?
This is how it works:
1) "Shop" like in any webshop.
2) Fill in some very basic contact info. The zip code is important to let us calculate freight.
3) Press "send".
The offer, sent by e-mail if nothing else is choosen, is free of charge and any obligations. It will be sent to you as soon as we've received a freight offer from our freight contacts.
Facts
Dimensions
Length: 126 cm
Length including pull-out leg section: 175 cm
Width: 55 cm
Height: 53-110 cm
Backrest length: 90 cm
Backrest angle: 47°
Seat lenght: 34 cm
Seat/Trendelenburg angle -12°
Anti-Trendelenburg 5°
Weight: 55 kg
Lift capacity: 200 kg
Length: 126 cm
Length including pull-out leg section: 175 cm
Width: 55 cm
Height: 53-110 cm
Backrest length: 90 cm
Backrest angle: 47°
Seat lenght: 34 cm
Seat/Trendelenburg angle -12°
Anti-Trendelenburg 5°
Weight: 55 kg
Lift capacity: 200 kg
Film
Attachments
Sök reservdelar till denna produkt
Back